I cannot get the top to retract on my 67, far it will unlock the top, then nothing. Also, the power goes to the dash switch, but not the key.
Any suggestions?
Thank you.
Royce
Convertible Top won’t lower after unlocking
Moderators: Dan Szwarc, jleonard
- Dan Szwarc
- Site Admin
- Posts: 29878
- Joined: Fri Jun 16, 2000 1:01 am
- Contact:
Re: Convertible Top won’t lower after unlocking
First question: Do you have a factory shop manual?
If not, PM me or buy one.
Lock then unlock the top using the UP/DOWN switch. If it continues, the you TOP UNLOCKED switch inside the top header is marginal or needs a slight adjustment.
If that doesn’t work, remove the header cover and inspect the mechanism to locate the switch that is being pushed by the mechanism. Push the switch against the metal bracket or adjust the switch to be pushed more by the bracket.
You could have a bad TOP DOWN relay. It’s one of the relays in the trunk. The manual identifies it. If it doesn’t click, then it’s bad.
If not, PM me or buy one.
Lock then unlock the top using the UP/DOWN switch. If it continues, the you TOP UNLOCKED switch inside the top header is marginal or needs a slight adjustment.
If that doesn’t work, remove the header cover and inspect the mechanism to locate the switch that is being pushed by the mechanism. Push the switch against the metal bracket or adjust the switch to be pushed more by the bracket.
You could have a bad TOP DOWN relay. It’s one of the relays in the trunk. The manual identifies it. If it doesn’t click, then it’s bad.
The below links are mostly dead.
Dan Szwarc: 1966 Convertible
Shop Manual or MPCs available
Signature rules.
Help the forum for 2024.
Dan Szwarc: 1966 Convertible
Shop Manual or MPCs available
Signature rules.
Help the forum for 2024.
Re: Convertible Top won’t lower after unlocking
Thank you for the information will check that out. Have a great day.
Royce
Royce
Who is online
Users browsing this forum: No registered users and 0 guests