HOW TO REMOVE THE FT AND REAR TOP MLDGS TO REMOVE CONV. TOP
Moderators: Dan Szwarc, jleonard
HOW TO REMOVE THE FT AND REAR TOP MLDGS TO REMOVE CONV. TOP
59 lincoln con. convertible, how do you remove the ft and rearconv. top mldgs, I took out the phillips screws, still tight, I am changing the top to new
- Dan Szwarc
- Site Admin
- Posts: 29836
- Joined: Fri Jun 16, 2000 1:01 am
- Contact:
Re: HOW TO REMOVE THE FT AND REAR TOP MLDGS TO REMOVE CONV. TOP
I think there is black rubbery sealant sandwiches between layers to keep put water in addition to the screws holding the metal trim.
Try carefully peeling back small areas or use a hair dryer as heat to soften up any sealants.
I’m not very familiar with 1959. Do the shop manual have any tips?
Try carefully peeling back small areas or use a hair dryer as heat to soften up any sealants.
I’m not very familiar with 1959. Do the shop manual have any tips?
The below links are mostly dead.
Dan Szwarc: 1966 Convertible
Shop Manual or MPCs available
Signature rules.
Help the forum for 2024.
Dan Szwarc: 1966 Convertible
Shop Manual or MPCs available
Signature rules.
Help the forum for 2024.
Who is online
Users browsing this forum: No registered users and 0 guests