the craziest Continental project EVER!
Moderators: Dan Szwarc, jleonard
- sykolincoln
- Dedicated Enthusiast
- Posts: 700
- Joined: Sun Feb 17, 2008 9:07 am
- Location: south GA baby!
- Contact:
Re: the craziest Continental project EVER!
ok finally had the chance to post again...
here is the right fender in primer after rough body work.... it turned out pretty good so far
heres an update on the drivers door panel, now you can kinda see where im headed
ill post some more pics after this weekend of everything as well.
oh and got my two chambers in!!! whoot!!!
just waiting on my exhaust gaskets and ill hook these babies up next week!
here is the right fender in primer after rough body work.... it turned out pretty good so far
heres an update on the drivers door panel, now you can kinda see where im headed
ill post some more pics after this weekend of everything as well.
oh and got my two chambers in!!! whoot!!!
just waiting on my exhaust gaskets and ill hook these babies up next week!
SUICIDE SLABS MAGAZINE!
http://www.thelincolnforum.net/phpbb3/v ... =8&t=50913
https://www.facebook.com/SuicideSlabsMagazine/
SUICIDE SLABS group on Facebook
Think your lincoln is a project? LOL! I got your project right here!
A CUTTING TORCH, A WELDER, A SAWZALL, AND A LINCOLN....ITS A BEAUTIFUL THING!
http://www.thelincolnforum.net/phpbb3/v ... =8&t=50913
https://www.facebook.com/SuicideSlabsMagazine/
SUICIDE SLABS group on Facebook
Think your lincoln is a project? LOL! I got your project right here!
A CUTTING TORCH, A WELDER, A SAWZALL, AND A LINCOLN....ITS A BEAUTIFUL THING!
- sykolincoln
- Dedicated Enthusiast
- Posts: 700
- Joined: Sun Feb 17, 2008 9:07 am
- Location: south GA baby!
- Contact:
Re: the craziest Continental project EVER!
got the drivers fender in rough bodywork and primer today
and smoothed out and primed my remolded drivers arm rest.
tomorow ill probably put the drivers interior door together so everyone can get an idea how it will be when done.
oh btw....Am I the only one that is putting in work now?
and smoothed out and primed my remolded drivers arm rest.
tomorow ill probably put the drivers interior door together so everyone can get an idea how it will be when done.
oh btw....Am I the only one that is putting in work now?
SUICIDE SLABS MAGAZINE!
http://www.thelincolnforum.net/phpbb3/v ... =8&t=50913
https://www.facebook.com/SuicideSlabsMagazine/
SUICIDE SLABS group on Facebook
Think your lincoln is a project? LOL! I got your project right here!
A CUTTING TORCH, A WELDER, A SAWZALL, AND A LINCOLN....ITS A BEAUTIFUL THING!
http://www.thelincolnforum.net/phpbb3/v ... =8&t=50913
https://www.facebook.com/SuicideSlabsMagazine/
SUICIDE SLABS group on Facebook
Think your lincoln is a project? LOL! I got your project right here!
A CUTTING TORCH, A WELDER, A SAWZALL, AND A LINCOLN....ITS A BEAUTIFUL THING!
- 66continentalefi
- Occasional Visitor
- Posts: 52
- Joined: Mon Dec 23, 2013 12:15 pm
- Contact:
Re: the craziest Continental project EVER!
Seems like you and darrylqmiller are the only ones right now!. This winter has been a real bitch around here!. Keep the updates coming its looking good!
66 continental 48000 miles homemade lowering blocks, msd ignition, electric fans and powerjection 3 EFI
94 towncar 158000 kms stock, big stereo, daily driver
05 aviator 172000 kms wifes dd my repair bill!
94 towncar 158000 kms stock, big stereo, daily driver
05 aviator 172000 kms wifes dd my repair bill!
- linc64
- TLFer for Life
- Posts: 6218
- Joined: Tue Oct 19, 2004 1:01 am
- Location: Costa Mesa, Ca.
- Contact:
Re: the craziest Continental project EVER!
Barry has been doing a lot of work this winter also:
http://www.thelincolnforum.net/phpbb3/v ... &start=210
http://www.thelincolnforum.net/phpbb3/v ... &start=210
Jim Ayres
Western Region Director
Photobucket link blocked by PB
Join the LCOC
Join the Lincoln Motorcar Foundation
Western Region Director
Photobucket link blocked by PB
Join the LCOC
Join the Lincoln Motorcar Foundation
- sykolincoln
- Dedicated Enthusiast
- Posts: 700
- Joined: Sun Feb 17, 2008 9:07 am
- Location: south GA baby!
- Contact:
Re: the craziest Continental project EVER!
got my new intake painted today
Ill paint some more engine parts when I take them off when I put the intake on
Ill paint some more engine parts when I take them off when I put the intake on
SUICIDE SLABS MAGAZINE!
http://www.thelincolnforum.net/phpbb3/v ... =8&t=50913
https://www.facebook.com/SuicideSlabsMagazine/
SUICIDE SLABS group on Facebook
Think your lincoln is a project? LOL! I got your project right here!
A CUTTING TORCH, A WELDER, A SAWZALL, AND A LINCOLN....ITS A BEAUTIFUL THING!
http://www.thelincolnforum.net/phpbb3/v ... =8&t=50913
https://www.facebook.com/SuicideSlabsMagazine/
SUICIDE SLABS group on Facebook
Think your lincoln is a project? LOL! I got your project right here!
A CUTTING TORCH, A WELDER, A SAWZALL, AND A LINCOLN....ITS A BEAUTIFUL THING!
- sykolincoln
- Dedicated Enthusiast
- Posts: 700
- Joined: Sun Feb 17, 2008 9:07 am
- Location: south GA baby!
- Contact:
Re: the craziest Continental project EVER!
well here ya go homies!! here is the drivers door panel nearly all smoothed out. Im pretty happy with the way it turned out, now I plan on getting some material and covering it so I can get an idea as to how I think the final product may look.
oh and spent some time after work today putting in my new muffs! And im super stoked as to how they turned out, they fit very neatly and tightly in the rear corners of my car just where I wanted them.
sorry I forgot to take and underside shot when I had it on the lift, I will get one I need to put two more exhuast hangers underneath... its sturdy and dosnt move but I like overkill
oh also need to order some 2 1/2 straight chrome tips to put in place of the temp tips
oh and spent some time after work today putting in my new muffs! And im super stoked as to how they turned out, they fit very neatly and tightly in the rear corners of my car just where I wanted them.
sorry I forgot to take and underside shot when I had it on the lift, I will get one I need to put two more exhuast hangers underneath... its sturdy and dosnt move but I like overkill
oh also need to order some 2 1/2 straight chrome tips to put in place of the temp tips
SUICIDE SLABS MAGAZINE!
http://www.thelincolnforum.net/phpbb3/v ... =8&t=50913
https://www.facebook.com/SuicideSlabsMagazine/
SUICIDE SLABS group on Facebook
Think your lincoln is a project? LOL! I got your project right here!
A CUTTING TORCH, A WELDER, A SAWZALL, AND A LINCOLN....ITS A BEAUTIFUL THING!
http://www.thelincolnforum.net/phpbb3/v ... =8&t=50913
https://www.facebook.com/SuicideSlabsMagazine/
SUICIDE SLABS group on Facebook
Think your lincoln is a project? LOL! I got your project right here!
A CUTTING TORCH, A WELDER, A SAWZALL, AND A LINCOLN....ITS A BEAUTIFUL THING!
- darrylqmiller
- Lincoln Maniac
- Posts: 496
- Joined: Tue Apr 05, 2011 12:58 am
- Location: Peachtree City, Georgia
- Contact:
Re: the craziest Continental project EVER!
I've been blessed two ways:66continentalefi wrote:Seems like you and darrylqmiller are the only ones right now!. This winter has been a real bitch around here!. Keep the updates coming its looking good!
1) I'm in my brother-in-laws shop this year so I have plenty of room.
2) My wife got a killer job making way more money than I ever did but travels a lot so someone had to stay home with the kids. And whats a guy to do when the kids are at school all day after the house is cleaned? :smt003 :smt003 Lincoln time!
Side note:
Looks awesome Sykolincoln keep the progress coming. Trying my hand at fiberglassing repairs on my broken armrest next. Not as cool as your metal ones.
house is sold should be in GA in May. Snowed five inches and then w=rained all the next day while 70 degrees in GA.
How I bagged it: http://www.thelincolnforum.net/phpbb3/v ... 42&t=42724
Build thread: http://www.thelincolnforum.net/phpbb3/v ... 38&t=38977
What I thought was fuel pump noise: http://www.thelincolnforum.net/phpbb3/v ... =1&t=39580
Edelbrock 1406 install: http://www.thelincolnforum.net/phpbb3/v ... =1&t=45554
Build thread: http://www.thelincolnforum.net/phpbb3/v ... 38&t=38977
What I thought was fuel pump noise: http://www.thelincolnforum.net/phpbb3/v ... =1&t=39580
Edelbrock 1406 install: http://www.thelincolnforum.net/phpbb3/v ... =1&t=45554
- sykolincoln
- Dedicated Enthusiast
- Posts: 700
- Joined: Sun Feb 17, 2008 9:07 am
- Location: south GA baby!
- Contact:
Re: the craziest Continental project EVER!
what part of ga you moving to? im hoping to join a few more lincs to goto shows starting the end of this year and next
SUICIDE SLABS MAGAZINE!
http://www.thelincolnforum.net/phpbb3/v ... =8&t=50913
https://www.facebook.com/SuicideSlabsMagazine/
SUICIDE SLABS group on Facebook
Think your lincoln is a project? LOL! I got your project right here!
A CUTTING TORCH, A WELDER, A SAWZALL, AND A LINCOLN....ITS A BEAUTIFUL THING!
http://www.thelincolnforum.net/phpbb3/v ... =8&t=50913
https://www.facebook.com/SuicideSlabsMagazine/
SUICIDE SLABS group on Facebook
Think your lincoln is a project? LOL! I got your project right here!
A CUTTING TORCH, A WELDER, A SAWZALL, AND A LINCOLN....ITS A BEAUTIFUL THING!
- sykolincoln
- Dedicated Enthusiast
- Posts: 700
- Joined: Sun Feb 17, 2008 9:07 am
- Location: south GA baby!
- Contact:
Re: the craziest Continental project EVER!
back for some updates!
finaly tired of riding static and decided if I dont get my ass in gear ill have paint on this unit before the hydraulics are working!! soo.... I allready have my plans laid out to order a few things but I went ahead and setup a single dump gate pump for the rear and hooked it up so I can lift the rear for some travel again...little did I know in my infinite wisdom of hyrdraulics I went with a too tall of a cylinder and they hit the underside of my deck when hitting a heavy bump....doh! and durrrr.... I should have known better but sometimes I just see stars..lol got some 8 inch cyls comming next week that will fix that slight problem...
also got tired of my roof lookin like dook so in the little bit of free time at work I welded the emblem holes up, seamed sealed the drip channels and blocked the roof
then threw on some primey prime........cant wait to finish up the body work on the right side!!
ill do some more work next week for sure!! hopefully I will be ordering my manifolds for my hydro pump and finaly finish my suspension!!
finaly tired of riding static and decided if I dont get my ass in gear ill have paint on this unit before the hydraulics are working!! soo.... I allready have my plans laid out to order a few things but I went ahead and setup a single dump gate pump for the rear and hooked it up so I can lift the rear for some travel again...little did I know in my infinite wisdom of hyrdraulics I went with a too tall of a cylinder and they hit the underside of my deck when hitting a heavy bump....doh! and durrrr.... I should have known better but sometimes I just see stars..lol got some 8 inch cyls comming next week that will fix that slight problem...
also got tired of my roof lookin like dook so in the little bit of free time at work I welded the emblem holes up, seamed sealed the drip channels and blocked the roof
then threw on some primey prime........cant wait to finish up the body work on the right side!!
ill do some more work next week for sure!! hopefully I will be ordering my manifolds for my hydro pump and finaly finish my suspension!!
SUICIDE SLABS MAGAZINE!
http://www.thelincolnforum.net/phpbb3/v ... =8&t=50913
https://www.facebook.com/SuicideSlabsMagazine/
SUICIDE SLABS group on Facebook
Think your lincoln is a project? LOL! I got your project right here!
A CUTTING TORCH, A WELDER, A SAWZALL, AND A LINCOLN....ITS A BEAUTIFUL THING!
http://www.thelincolnforum.net/phpbb3/v ... =8&t=50913
https://www.facebook.com/SuicideSlabsMagazine/
SUICIDE SLABS group on Facebook
Think your lincoln is a project? LOL! I got your project right here!
A CUTTING TORCH, A WELDER, A SAWZALL, AND A LINCOLN....ITS A BEAUTIFUL THING!
- darrylqmiller
- Lincoln Maniac
- Posts: 496
- Joined: Tue Apr 05, 2011 12:58 am
- Location: Peachtree City, Georgia
- Contact:
Re: the craziest Continental project EVER!
Lookin good!!!
How I bagged it: http://www.thelincolnforum.net/phpbb3/v ... 42&t=42724
Build thread: http://www.thelincolnforum.net/phpbb3/v ... 38&t=38977
What I thought was fuel pump noise: http://www.thelincolnforum.net/phpbb3/v ... =1&t=39580
Edelbrock 1406 install: http://www.thelincolnforum.net/phpbb3/v ... =1&t=45554
Build thread: http://www.thelincolnforum.net/phpbb3/v ... 38&t=38977
What I thought was fuel pump noise: http://www.thelincolnforum.net/phpbb3/v ... =1&t=39580
Edelbrock 1406 install: http://www.thelincolnforum.net/phpbb3/v ... =1&t=45554
- sykolincoln
- Dedicated Enthusiast
- Posts: 700
- Joined: Sun Feb 17, 2008 9:07 am
- Location: south GA baby!
- Contact:
Re: the craziest Continental project EVER!
Going to get the 8 inch cylinders this week and a set of 4 inch cylinders are on the way. ...should be able to button up the hydraulics fully in a month!
SUICIDE SLABS MAGAZINE!
http://www.thelincolnforum.net/phpbb3/v ... =8&t=50913
https://www.facebook.com/SuicideSlabsMagazine/
SUICIDE SLABS group on Facebook
Think your lincoln is a project? LOL! I got your project right here!
A CUTTING TORCH, A WELDER, A SAWZALL, AND A LINCOLN....ITS A BEAUTIFUL THING!
http://www.thelincolnforum.net/phpbb3/v ... =8&t=50913
https://www.facebook.com/SuicideSlabsMagazine/
SUICIDE SLABS group on Facebook
Think your lincoln is a project? LOL! I got your project right here!
A CUTTING TORCH, A WELDER, A SAWZALL, AND A LINCOLN....ITS A BEAUTIFUL THING!
- sykolincoln
- Dedicated Enthusiast
- Posts: 700
- Joined: Sun Feb 17, 2008 9:07 am
- Location: south GA baby!
- Contact:
Re: the craziest Continental project EVER!
slow day at work resulted in this
BOOM!
heres the old one....still worked but weeping out water steadily
got my 4 inch cylinders in yesterday as well
comming together
BOOM!
heres the old one....still worked but weeping out water steadily
got my 4 inch cylinders in yesterday as well
comming together
SUICIDE SLABS MAGAZINE!
http://www.thelincolnforum.net/phpbb3/v ... =8&t=50913
https://www.facebook.com/SuicideSlabsMagazine/
SUICIDE SLABS group on Facebook
Think your lincoln is a project? LOL! I got your project right here!
A CUTTING TORCH, A WELDER, A SAWZALL, AND A LINCOLN....ITS A BEAUTIFUL THING!
http://www.thelincolnforum.net/phpbb3/v ... =8&t=50913
https://www.facebook.com/SuicideSlabsMagazine/
SUICIDE SLABS group on Facebook
Think your lincoln is a project? LOL! I got your project right here!
A CUTTING TORCH, A WELDER, A SAWZALL, AND A LINCOLN....ITS A BEAUTIFUL THING!
- sykolincoln
- Dedicated Enthusiast
- Posts: 700
- Joined: Sun Feb 17, 2008 9:07 am
- Location: south GA baby!
- Contact:
Re: the craziest Continental project EVER!
sometimes its the little things....
ford hood bumpers...and some nutserts....
ford hood bumpers...and some nutserts....
SUICIDE SLABS MAGAZINE!
http://www.thelincolnforum.net/phpbb3/v ... =8&t=50913
https://www.facebook.com/SuicideSlabsMagazine/
SUICIDE SLABS group on Facebook
Think your lincoln is a project? LOL! I got your project right here!
A CUTTING TORCH, A WELDER, A SAWZALL, AND A LINCOLN....ITS A BEAUTIFUL THING!
http://www.thelincolnforum.net/phpbb3/v ... =8&t=50913
https://www.facebook.com/SuicideSlabsMagazine/
SUICIDE SLABS group on Facebook
Think your lincoln is a project? LOL! I got your project right here!
A CUTTING TORCH, A WELDER, A SAWZALL, AND A LINCOLN....ITS A BEAUTIFUL THING!
- sykolincoln
- Dedicated Enthusiast
- Posts: 700
- Joined: Sun Feb 17, 2008 9:07 am
- Location: south GA baby!
- Contact:
Re: the craziest Continental project EVER!
made me a remote fill tank for my hydraulic pump hidden in the fender...\
used part of a pump resivior
mounted up squeeky clean
still got to weld a bung under it to hook a line to the pump resi but its close
also finly got started on my right side pipes and extending my rocker like the left...
used part of a pump resivior
mounted up squeeky clean
still got to weld a bung under it to hook a line to the pump resi but its close
also finly got started on my right side pipes and extending my rocker like the left...
SUICIDE SLABS MAGAZINE!
http://www.thelincolnforum.net/phpbb3/v ... =8&t=50913
https://www.facebook.com/SuicideSlabsMagazine/
SUICIDE SLABS group on Facebook
Think your lincoln is a project? LOL! I got your project right here!
A CUTTING TORCH, A WELDER, A SAWZALL, AND A LINCOLN....ITS A BEAUTIFUL THING!
http://www.thelincolnforum.net/phpbb3/v ... =8&t=50913
https://www.facebook.com/SuicideSlabsMagazine/
SUICIDE SLABS group on Facebook
Think your lincoln is a project? LOL! I got your project right here!
A CUTTING TORCH, A WELDER, A SAWZALL, AND A LINCOLN....ITS A BEAUTIFUL THING!
- twistngo
- Frequent Contributor
- Posts: 243
- Joined: Tue May 18, 2010 12:18 am
- Location: Louisville, KY
- Contact:
Re: the craziest Continental project EVER!
Looking better everyday, like the fill tank. The weather is finnaly warming up here gonna bring mine home this week and get back on it , hopefully with a vengence.
66 Continental convertible, 13 SHO slightly tuned
02 Custom built softtail, 15 Expedition EL, 05 Thunderbird
00 Crown Vic Eaton M112 blower, Tremec 5speed......etc
Suzuki RF900 Just a little engine work...... And yes my wife is invisible
02 Custom built softtail, 15 Expedition EL, 05 Thunderbird
00 Crown Vic Eaton M112 blower, Tremec 5speed......etc
Suzuki RF900 Just a little engine work...... And yes my wife is invisible
Who is online
Users browsing this forum: No registered users and 0 guests