Hi guys
Painter sort of boxed all my screws together. Playing hell sifting through a box of mixed screws.Anyone know the correct wheel well screw size?
Thanks!
Mark
64 wheel well screw sizes?
Moderator: Dan Szwarc
-
- Frequent Contributor
- Posts: 152
- Joined: Mon May 09, 2005 1:41 pm
- Location: Glendale, CA
- Contact:
64 wheel well screw sizes?
loquet
- Dan Szwarc
- Site Admin
- Posts: 29775
- Joined: Fri Jun 16, 2000 1:01 am
- Contact:
Re: 64 wheel well screw sizes?
If you mean wheel well splash shield screws, they would likely be flange-head hex bolts with 1/2" heads, star washers (SEMS), and 5/16-18 by 1-1/4" long dog point.
The below links are mostly dead.
Dan Szwarc: 1966 Convertible
Shop Manual or MPCs available
Signature rules.
Help the forum for 2024.
Dan Szwarc: 1966 Convertible
Shop Manual or MPCs available
Signature rules.
Help the forum for 2024.
-
- Addicted to Lincolns
- Posts: 1940
- Joined: Wed Apr 29, 2009 1:57 pm
- Location: St. George. Maine
- Contact:
Re: 64 wheel well screw sizes?
I think they're phillips and have a funny funnel shaped head, so they sit flat when installed, somewhere between a half and three quarters long. At least that was what was on my 63 wheel wells. Wayne
- Dan Szwarc
- Site Admin
- Posts: 29775
- Joined: Fri Jun 16, 2000 1:01 am
- Contact:
Re: 64 wheel well screw sizes?
The below links are mostly dead.
Dan Szwarc: 1966 Convertible
Shop Manual or MPCs available
Signature rules.
Help the forum for 2024.
Dan Szwarc: 1966 Convertible
Shop Manual or MPCs available
Signature rules.
Help the forum for 2024.
-
- Lincoln Maniac
- Posts: 290
- Joined: Sun Mar 15, 2020 8:03 am
- Location: Williamstown, NJ
- Contact:
Re: 64 wheel well screw sizes?
Check with a local Napa if you have one nearby. They have a large selection of trim screws bag packed under their Balkamp label. They even have the unusual "small headed" trim screws that are frequently used on the interior trim. For example a #8 screw with a #6 head. The screws for the wheel lips moldings are most likely round, washer head, Phillips screws. Probably a #4 or a #6.
1965 Sedan, white w/ black vinyl top and red leather. 28k miles
Who is online
Users browsing this forum: TONY NZ 64 and 3 guests