Hayden fan/clutch part# for our cars

This forum is for listing part numbers, substitutions, and suggestions for replacement or new parts for our Lincolns.

Moderator: Dan Szwarc

Post Reply
User avatar
2sasilverbullet
Addicted to Lincolns
Posts: 1584
Joined: Wed Jun 30, 2010 11:06 am
Location: San Antonio, Tx
Contact:

Hayden fan/clutch part# for our cars

Post by 2sasilverbullet »

I replaced my fan/clutch last night, thought I'd share this info. These are all Hayden part #'s. Available at most auto parts stores. As you can see from the list it's either a #2710 or a #2723, or a REV 2723.

CONTINENTAL
78-68 V8 460 7.5 2710
79-77 V8 400 6.6 2710
80 V8 351 5.8 2710
92-85 V8 302 5.0 REV 2723
84-80 V8 302 5.0 2710
82 V6 232 3.8 2723

MARK III, IV, V, VI, VII
78-71 V8 460 7.5 2710
79-77 V8 400 6.6 2710
80 V8 351 5.8 2710
92-85 V8 302 5.0 REV 2723
84-80 V8 302 5.0 2710
No Lincoln currently...
User avatar
cliffdavis
Lincoln Maniac
Posts: 348
Joined: Mon Jun 01, 2009 11:16 am
Location: New Orleans, Louisiana
Contact:

Re: Hayden fan/clutch part# for our cars

Post by cliffdavis »

MEL motors use a Hayden 2741. At least my 64 does. $40 from rockauto.com
Last edited by cliffdavis on Sun Sep 19, 2010 10:34 am, edited 1 time in total.
64 Continental Sedan
Daily Driver, Weekend Fixer
User avatar
King James
Occasional Visitor
Posts: 77
Joined: Tue Jul 14, 2009 11:51 am
Location: Palmdale, Ca
Contact:

Re: Hayden fan/clutch part# for our cars

Post by King James »

I just got one for my 1962 p# 2747 Hayden Heavy Duty disengaged 20-30% of shaft speed and 80-90% engaged of shaft speed. Works great!
User avatar
autostick
Addicted to Lincolns
Posts: 2480
Joined: Sun Mar 16, 2003 1:01 am
Location: 1963 Lincoln Continental Sedan
Contact:

Re: Hayden fan/clutch part# for our cars

Post by autostick »

Anyone know what clutch fan fits the 1963 MEL 430 engine? The Hayden 2741 listed application is a Chevy Corvette, and the Hayden 2747 listed application is Ford since 1976, so the catalogs are not much help. I assume you guys picked the clutch based on dimensions? Do you know if the 2741 or 2747 fits my 1963? Any help or suggestions are much appreciated. Thanks.
Image
User avatar
autostick
Addicted to Lincolns
Posts: 2480
Joined: Sun Mar 16, 2003 1:01 am
Location: 1963 Lincoln Continental Sedan
Contact:

Re: Hayden fan/clutch part# for our cars

Post by autostick »

Image
I bump this thread as I hope to buy a clutch fan soon, any recommendation any brand is most welcome.
User avatar
Dan Szwarc
Site Admin
Posts: 29775
Joined: Fri Jun 16, 2000 1:01 am
Contact:

Re: Hayden fan/clutch part# for our cars

Post by Dan Szwarc »

Ken,
61 to 65 fan clutches all are the same according to my MPC.
User avatar
autostick
Addicted to Lincolns
Posts: 2480
Joined: Sun Mar 16, 2003 1:01 am
Location: 1963 Lincoln Continental Sedan
Contact:

Re: Hayden fan/clutch part# for our cars

Post by autostick »

Dan Szwarc wrote:Ken, to 65 fan clutches all are the same according to my MPC.
Dan thanks for pointing that out. I was trying to resolve the two statements above about using the Hayden 2747 verus the Hayden 2741- according to their spec sheets the flange diameter and the fan mount heights are different between the two:
http://www.haydenauto.com/upload/Hayden ... clutch.pdf
2741 C STD 7.20 .75/ .63 2.56 1.80 3.25 2.62 3.51 5/16-18 HOLE (4)
2747 C STD 7.20 .75* .63 2.59 1.62 3.25 2.62 3.34 5/16-18 HOLE (4)
I guess I was hoping for the easy button of prior knowledge, I need to pull my fan and measure the clutch dimensions, so I won't drive it until the clutch arrives. These things are on amazon and ebay so I need to order soon. Cheers.Image
User avatar
autostick
Addicted to Lincolns
Posts: 2480
Joined: Sun Mar 16, 2003 1:01 am
Location: 1963 Lincoln Continental Sedan
Contact:

Re: Hayden fan/clutch part# for our cars

Post by autostick »

I am bumping this post to say I installed the Hayden 2741 without incident, a 30 minute job. Clearances are perfect with the fan centered between the radiator and engine. I found this heavy duty clutch on Amazon for $38.71 including shipping, it is slightly larger than NOS but looks and works great as pictured below. Used new grade 8 bolts at 18 foot pounds torque; Stripped and powder coated the fan blades.

Hayden, Inc. 2741 Thermal Fan Clutch
by Hayden Automotive
Price: $38.71 & this item ships for FREE with Super Saver Shipping.
Attachments
fan.jpg
User avatar
Classiccannuk
Lincoln Maniac
Posts: 339
Joined: Thu Sep 22, 2016 5:28 pm
Location: Richmond Hill Ontario Canada
Contact:

Re: Hayden fan/clutch part# for our cars

Post by Classiccannuk »

autostick wrote:I am bumping this post to say I installed the Hayden 2741 without incident, a 30 minute job. Clearances are perfect with the fan centered between the radiator and engine. I found this heavy duty clutch on Amazon for $38.71 including shipping, it is slightly larger than NOS but looks and works great as pictured below. Used new grade 8 bolts at 18 foot pounds torque; Stripped and powder coated the fan blades.

Hayden, Inc. 2741 Thermal Fan Clutch
by Hayden Automotive
Price: $38.71 & this item ships for FREE with Super Saver Shipping.
Nice!! Just the info I was looking for, Thank You!
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests