65 Convertible Knife Switch Problem
Moderators: Dan Szwarc, jleonard
-
- Newbie
- Posts: 7
- Joined: Thu Jun 20, 2019 12:59 pm
- Contact:
65 Convertible Knife Switch Problem
The end of the lever of my knife switch is falling off the regulator roller when the window is lowered more than 7 inches using the window switch. Of course when this happens it screws up my auto drop/rise function until I put the lever back on the roller. Its as if the lever is too short or rotates down too far until it falls off the roller. Then when I roll up the window the roller can't catch the lever because its now out of the path of travel of the roller. The knife switch is securely fastened in place with the 3 screws. What could be causing this and what is the solution?
Who is online
Users browsing this forum: No registered users and 2 guests