65 Convertible Knife Switch Problem

Anything that pertains only to a convertible goes here. Such as: Top material, pads, mechanism, hydraulic pumps, switch and relay mechanisms, latches, etc.

Moderators: Dan Szwarc, jleonard

65 Convertible Knife Switch Problem

Postby Live2Ride57 » Tue Jan 07, 2020 3:15 pm

The end of the lever of my knife switch is falling off the regulator roller when the window is lowered more than 7 inches using the window switch. Of course when this happens it screws up my auto drop/rise function until I put the lever back on the roller. Its as if the lever is too short or rotates down too far until it falls off the roller. Then when I roll up the window the roller can't catch the lever because its now out of the path of travel of the roller. The knife switch is securely fastened in place with the 3 screws. What could be causing this and what is the solution?
Posts: 4
Joined: Thu Jun 20, 2019 11:59 am

Return to Convertibles, Convertibles, Convertibles

Who is online

Users browsing this forum: No registered users and 2 guests