Lincoln 341 ci oil pan
-
- Newbie
- Posts: 3
- Joined: Sat May 05, 2018 3:34 pm
- Contact:
Lincoln 341 ci oil pan
Does anyone know if a Thunderbird 55-57 292-312 ci or Ford truck y block oil pan will fit on a 341 y block Lincoln engine? Need a rear sump oil pan because I want to use a Fatmans front stub, and the front sump pan wont clear the power rack. Someone told me that they thought the 341 was a larger block than a 292 or 312, so the oil pan would not be interchangeable. Any thoughts or help would be appreciated.
- action
- LCOC Regional Director
- Posts: 5221
- Joined: Mon Jun 09, 2003 1:01 am
- Location: Phoenix, Arizona 85008
- Contact:
Re: Lincoln 341 ci oil pan
I am going to say no.
Based on the 341 gasket
https://www.ebay.com/itm/Ford-279-332-L ... w4&vxp=mtr
And the 292/312 gasket
https://www.ebay.com/itm/Ford-279-332-L ... w4&vxp=mtr
If these pictures are accurate one gasket has 21 holes the other 22.
>>>>>>>>>>>>>Action
Based on the 341 gasket
https://www.ebay.com/itm/Ford-279-332-L ... w4&vxp=mtr
And the 292/312 gasket
https://www.ebay.com/itm/Ford-279-332-L ... w4&vxp=mtr
If these pictures are accurate one gasket has 21 holes the other 22.
>>>>>>>>>>>>>Action
Phoenix - Yeah, it's hot, however it's a dry heat
2006 Lincoln Navigator Limited 5.4l 3V
1996 Lincoln Mark VIII 2DR Coupe Diamond Anniversary 4.6l DOHC, 4R70W, 3.07
1970 Continental Mark III Triple Black 460 4v, C6, 2.80 (Used for Woodward Dream Cruise or just generally stored in Michigan)
1966 Lincoln Continental 4DR Convertible 462 4v, C6, 3.00
1966 Mercury Park Lane 4DR Breezeway 410 4v, C6, 2.80
2006 Lincoln Navigator Limited 5.4l 3V
1996 Lincoln Mark VIII 2DR Coupe Diamond Anniversary 4.6l DOHC, 4R70W, 3.07
1970 Continental Mark III Triple Black 460 4v, C6, 2.80 (Used for Woodward Dream Cruise or just generally stored in Michigan)
1966 Lincoln Continental 4DR Convertible 462 4v, C6, 3.00
1966 Mercury Park Lane 4DR Breezeway 410 4v, C6, 2.80
-
- Newbie
- Posts: 3
- Joined: Sat May 05, 2018 3:34 pm
- Contact:
Re: Lincoln 341 ci oil pan
From what I see on ebay, the pan gasket is for a 272,292 317 and 341 Ford , Mercury and Lincoln. Am I wrong on this?
- action
- LCOC Regional Director
- Posts: 5221
- Joined: Mon Jun 09, 2003 1:01 am
- Location: Phoenix, Arizona 85008
- Contact:
Re: Lincoln 341 ci oil pan
I may have mis counted. Looks like both are 21 holes.
>>>>>>>>>>>Action
>>>>>>>>>>>Action
Phoenix - Yeah, it's hot, however it's a dry heat
2006 Lincoln Navigator Limited 5.4l 3V
1996 Lincoln Mark VIII 2DR Coupe Diamond Anniversary 4.6l DOHC, 4R70W, 3.07
1970 Continental Mark III Triple Black 460 4v, C6, 2.80 (Used for Woodward Dream Cruise or just generally stored in Michigan)
1966 Lincoln Continental 4DR Convertible 462 4v, C6, 3.00
1966 Mercury Park Lane 4DR Breezeway 410 4v, C6, 2.80
2006 Lincoln Navigator Limited 5.4l 3V
1996 Lincoln Mark VIII 2DR Coupe Diamond Anniversary 4.6l DOHC, 4R70W, 3.07
1970 Continental Mark III Triple Black 460 4v, C6, 2.80 (Used for Woodward Dream Cruise or just generally stored in Michigan)
1966 Lincoln Continental 4DR Convertible 462 4v, C6, 3.00
1966 Mercury Park Lane 4DR Breezeway 410 4v, C6, 2.80
-
- Newbie
- Posts: 3
- Joined: Sat May 05, 2018 3:34 pm
- Contact:
Re: Lincoln 341 ci oil pan
If they are both 21holes, then I am still wondering if a Ford truck pan will fit on a 341 ci Lincoln block, or is the Lincoln block physically larger? Is there any place where I can find this information? Any help is greatly appreciated.
Who is online
Users browsing this forum: No registered users and 2 guests