63 A/C tag

[cadtbird]

Where does this go on the A/C system?

[Suicidekid63]

hope this helps

[Dan Szwarc]

This is correct.

[papawayne]

the plate was originally attached to the hoses with a thin aluminum strap. Don't know where you'd find one today. Wayne

[action]

the plate was originally attached to the hoses with a thin aluminum strap. Don't know where you'd find one today. Wayne

https://www.rubbertherightway.com/1964- ... 6-prd1.htm

[Suicidekid63]

the plate was originally attached to the hoses with a thin aluminum strap. Don't know where you'd find one today. Wayne

One could be easily made from an aluminum can. size of strap is 5/16" x 10 1/2" long. I put up pix of both ends, too. It loops into itself to wrap around the lines.
BTW- The tag listed in the link for sale, is correct... almost. The A/C tags for 61-64 had the year stamped on them as in the OP's picture and on the one I posted.
Not a deal breaker and better than nothing. IMo

[Stuart M. Cohen]

Try a metal zip tie. Not 100% correct, but close.

[cadtbird]

Thanks everyone. I think I have one of those metal straps.

[RMAENV]

Harbor Freight has Stainless ones... https://www.harborfreight.com/12-in-sta ... 60330.html

[George W]

Stainless steel cable ties. How about that ! Those thin aluminum tag straps are pretty frail and these SS ties may be just the ticket.

[vacreeper]

This is an old thread but I just bought 10 aluminum ties from the Lambretta people in New Hampshire. Total cost was $12.00. You can find their listings on Ebay.