Has anyone used a sealed power high volume oil pump? Several vendors have a note to check pan and crank clearance. Has anyone had a problem with the clearance
on this pump? I have done a forum search and not seen anything.
65 430 oil pump
Moderator: Dan Szwarc
- Dan Szwarc
- Site Admin
- Posts: 29820
- Joined: Fri Jun 16, 2000 1:01 am
- Contact:
Re: 65 430 oil pump
There should be no issue with pan clearance if you have the right pump.
Re: High volume oil pump
You will need to transfer the oil pickup. And clean it out.
Installing a new pump on the car is a pain in the ass. You can search on that. There's lots of posts about it.
Re: High volume oil pump
You will need to transfer the oil pickup. And clean it out.
Installing a new pump on the car is a pain in the ass. You can search on that. There's lots of posts about it.
The below links are mostly dead.
Dan Szwarc: 1966 Convertible
Shop Manual or MPCs available
Signature rules.
Help the forum for 2024.
Dan Szwarc: 1966 Convertible
Shop Manual or MPCs available
Signature rules.
Help the forum for 2024.
Who is online
Users browsing this forum: No registered users and 3 guests