The problem is the circuit breakers, that are part of the headlight switch, are either overloaded or defective. Replace the headlight switch and your flashing lights will be a thing of the past.
Have fun
John T.
Search found 44 matches
- Sun Sep 10, 2006 5:53 pm
- Forum: Electrical & Accessories
- Topic: Blinking dash and park lights after driving for a while
- Replies: 4
- Views: 434
- Wed Jul 19, 2006 8:10 am
- Forum: Convertibles, Convertibles, Convertibles
- Topic: '64Deck lid tries to close as top is coming down please help
- Replies: 1
- Views: 525
oMike: The early cars with the single pump and solenoids can be interesting to get operting properly. You have air in the lines and cylinders that is actually pushing the deck lid down while the top is trying to move. Make something to hold the deck lid in the open position. Disconnect the cylinders...
- Wed Dec 07, 2005 7:54 am
- Forum: Engine & Drivetrain
- Topic: 62 Conti Water Choke Leaking
- Replies: 7
- Views: 814
- Tue Dec 06, 2005 1:04 pm
- Forum: Engine & Drivetrain
- Topic: 62 Conti Water Choke Leaking
- Replies: 7
- Views: 814
- Tue Aug 02, 2005 3:47 pm
- Forum: Engine & Drivetrain
- Topic: 460 vs 462 for a 67 Continental
- Replies: 21
- Views: 1812
Oops... My reference to rare was pertaining to slba sides that were equiped with 460's. They ran only for 2 years while the MEL ran from many starting in the late 50's. The early 460's are desirable so finding a decent donor car for all the swapping hardware is difficult. Sorry for the confusion. Jo...
- Tue Aug 02, 2005 11:25 am
- Forum: Engine & Drivetrain
- Topic: 460 vs 462 for a 67 Continental
- Replies: 21
- Views: 1812
drcliff: I have looked closely at the 460 factory installed in a 68. The engine is very close to the frame rails which Lincoln added chamfers to clear the exhaust manifolds. The clearance is still very tight with the fragile early exhaust manifolds. Getting to the bolts on these manifolds is tight. ...
- Tue Jul 19, 2005 12:50 pm
- Forum: Engine & Drivetrain
- Topic: 460 vs 462 for a 67 Continental
- Replies: 21
- Views: 1812
Chris: It maybe tempting to install a 460 but there are many items that need to be adapted and some rare parts located. The 460 needs modified frame rails to clear the exhaust manifolds and you need the early manifolds to clear the frame steering gear etc. Check out the power steering pump and see w...
- Thu Jun 23, 2005 8:12 am
- Forum: Engine & Drivetrain
- Topic: cant get pistons in on my 1962 430
- Replies: 13
- Views: 1055
- Mon Jun 13, 2005 12:24 pm
- Forum: Engine & Drivetrain
- Topic: Picture of 67 Fuel Sender
- Replies: 10
- Views: 928
The gas gauge can be fairly easily removed with the tank in the car. If you can support the body and let the axle move down it provides more working space to wiggle the it out. You will be surprised at the amount of room there is with the axle dropped a little bit. Check the level of the fuel so the...
- Mon Jun 06, 2005 12:44 pm
- Forum: Public LCOC & LMCF-Related Discussion
- Topic: What Division Am I In?
- Replies: 2
- Views: 938
Stu: If you won first in your class, 61-63 Sedans, you would then be competing with all the other slab side sedans for a Lincoln trophy, which is the large champagne bucket. If you did not win this there are two reasons. One, there was another car with higher points. Two, no car had the minimum poin...
- Tue May 03, 2005 11:17 am
- Forum: Updating, Modernizing, and Customizing
- Topic: Will a mid '70 460 and C6 fit my 65 Continental??
- Replies: 2
- Views: 691
- Tue May 03, 2005 11:09 am
- Forum: Body, Trim, & Interiors
- Topic: 1961 Lincoln Continental Rear Bumper Ends - Removal
- Replies: 8
- Views: 964
- Mon Apr 25, 2005 7:50 am
- Forum: Engine & Drivetrain
- Topic: Ever removed '63 ex manifold w/o head, engine in car?
- Replies: 11
- Views: 842
- Mon Mar 07, 2005 5:07 pm
- Forum: Electrical & Accessories
- Topic: radio for 66' coupe
- Replies: 6
- Views: 683
66 Coupe: I will not cut a dash to install a modern radio so the alternatives are limited to under the dash, in the glovebox or a hidden radio with a wired remote. I have been very happy with an under dash radio in a custom made box with walnut veneer to match the door inserts. If this is done well ...
- Tue Feb 08, 2005 7:28 am
- Forum: Engine & Drivetrain
- Topic: how many hours to replace rear main seal?
- Replies: 6
- Views: 641